chrisRhoad.com » AE86

Winter clean up has begun.

Chris — Sat, 26 Nov 2011 18:00:44 +0000

I have no entensions of doing a typical ‘winter tear down’ but I do plan on doing some clean up on the Corolla. For starters, I yanked the heater core. Since I bought the car, its never worked and was completely useless so in the trash it goes.

Damage!

Chris — Thu, 30 Jun 2011 20:50:49 +0000

More on this later when I have more time.

© admin for chrisRhoad.com, 2011. | Permalink | No comment | Add to del.icio.us
Post tags: AE86, Clear to drift, Corolla, damage, Drift Car, The Machine

DriftWater 10 pics

Chris — Mon, 11 Apr 2011 16:23:30 +0000

I honestly dont feel like writing up a long post about how the event went so here’s a general synopsis:

(...)
Read the rest of DriftWater 10 pics

© admin for chrisRhoad.com, 2011. | Permalink | No comment | Add to del.icio.us
Post tags: AE86, blackwater, chris rhoad, Corolla, driftng, driftwater, driftwater 10, hatch, petey, pics, Rhoad Racing, vids

She’s still here.

Chris — Wed, 02 Feb 2011 00:21:29 +0000

Some thought that I sold the Corolla. I didn’t. Its been grounded to its room for the past four months due to bad behavior. Once it straightens up its act, I’ll let it go out and play.

© admin for chrisRhoad.com, 2011. | Permalink | No comment | Add to del.icio.us
Post tags: AE86, Corolla, flat tire, grounded, still here

Shake Of Worker

Chris — Fri, 21 Jan 2011 17:48:33 +0000

© admin for chrisRhoad.com, 2011. | Permalink | No comment | Add to del.icio.us
Post tags: AE86, Corolla, drift team, drifting, japan, shake of worker, video

Rhoad Rash at ESN

Chris — Thu, 19 Aug 2010 16:00:47 +0000

The shocks in the Corolla have been fighting a losing battle every since I bought the car. They finally gave out at the Elite Summer Nationals event. Additionally, the OEM diff decided to go out as well. It was all around bad weekend for the car but we still had a good time. At one point while out to eat, Blevins had us laughing so much that our food almost went cold before anyone had even taken a bite. Good times.

Locked and Loaded

Night before the event.

Jim Millard putting the NSP S14 through its paces.

OG Miata

Amanda at the helm.

Crashed while bunny hoping over a curb. The FlipCam was in my pocket.

Rhoad Rash

© admin for chrisRhoad.com, 2010. | Permalink | No comment | Add to del.icio.us
Post tags: 2010, AE86, bike, blown shocks, bmx, crash, Elite Summer Nationals, esn, flipcam, rhoad rash

A less-shitty DIY Home Depot lip option

Chris — Wed, 18 Aug 2010 21:26:29 +0000

Of all the nice front-lip options out there for the AE86 (and other platforms), there is ONE that I hate with an absolute passion; the “Home Depot” lip. Sure its cheap, but no matter what its installed on, it looks terrible.

Last year as I was vinyl wrapping the Corolla I went with the ‘home depot’ lip option and here was the result:

UGH….. horrible. Within 10 minutes of installing it, I ripped it off and began my search for another (cheap) option. Back to Home Depot I went and this is what I found.

Look familiar? Probably not. Its the inner lining for a door frame and it too is at Home Depot for a mere $5. They are on the same isle as the doors (or close by) and usually in a very tall bin. Unlike the Garden-frame (or whatever its called) variation, this liner is flexible yet VERY sturdy. This is actually my second lip of this type. The first one lasted well over a year and went through a lot of abuse; ie course cones and being smashed while loading the car on a trailer.

The process of putting this lip on is very simple as well. All you need is a Dremel (or cutting utensil of some sort), drill/screwdriver, and a few screws.

Using your Dremel, cut the tabs off one side of the lip.

Make sure the tab-less side is facing up and fasten the lip to the bottom or your bumper using a few screws. On my previous lip, I also used Double-Sided 3M tape which helped out a good bit too.

Its obviously not required, but I rounded off the edges at the bottom.

Its not a JDM Kouki lip, but it’ll do for now.

© admin for chrisRhoad.com, 2010. | Permalink | No comment | Add to del.icio.us
Post tags: AE86, alternative, Corolla, frame, home depot lip, jdm kouki lip, non shitty, window liner

Resurrection is a beautiful thing.

Chris — Wed, 11 Aug 2010 19:11:48 +0000

For every end, there is a new beginning. The new DMGG2 Hood.

© admin for chrisRhoad.com, 2010. | Permalink | No comment | Add to del.icio.us
Post tags: AE86, dmgg2 hood, dmggmasd, gossip girl, hood

Gettin Durty

Chris — Fri, 09 Jul 2010 16:59:12 +0000

Got around to working on the car this past weekend. Finally started installing the XS Power D680 and replaced the busted lug bolt in the left-rear hub. For now the battery is in a “mock-up” stage. Im going to verify a few more things with the XS Power folks and then finish bolting everything down this weekend.

While working on all this stuff, I came to the realization of how dirty this car really is as you can see from the picture below. Im all for battle-worn abuse but this thing is beyond my tolerance. It will be receiving a thorough cleaning very soon.

© admin for chrisRhoad.com, 2010. | Permalink | No comment | Add to del.icio.us
Post tags: AE86, bolt, Corolla, d680, dirty, The Machine, wheel lug, xs power

The end of an era.

Chris — Tue, 29 Jun 2010 16:00:36 +0000

Im sad to say that the DMGGASD hood is no longer For the last 6 months, its been kept outside and subjected to Mother Nature’s wrath. Honest, Im really bummed that it ended like this. When the car returned from Memphis I was hoping to pull the hood and hang it on the wall in the garage. I don’t know, I guess I still could. Never the less, a new one is under way.

To be honest, the whole damn car needs a lot of TLC. The logistics of the TO Event really took its toll. From the front bumper to the wheel lugs and LSD (needs rebuilt), the next couple of weeks/months will be spent bringing the car back up to mediocrity.

© admin for chrisRhoad.com, 2010. | Permalink | One comment | Add to del.icio.us
Post tags: AE86, Corolla, dmggmasd, gossip girl, hood, i was that guy, wheel lugs